Thermally Modified Wood Deck by Westwood Millworks: The Ultimate Solution for Durability and Beauty

Thermally Modified Wood Deck by Westwood Millworks: The Ultimate Solution for Durability and Beauty

If you're looking for a sustainable and durable option for your decking needs, a thermally modified wood deck may be the perfect choice for you. Thermally modified wood decking is a high-quality and long-lasting option that is created through a process of heat and steam treatment. This process changes the cellular structure of the wood, making it more resistant to rot, decay, and insect infestation.

At Westwood Millworks, we specialize in producing top-quality thermally-treated wood products, including decking. Our thermally modified wood decking is not only sustainable and durable, but it also has a beautiful natural look that will enhance the aesthetic of your outdoor space. With our thermally modified wood decking, you won't have to worry about large gaps between the deck boards as temperature and moisture levels fluctuate, making it a low-maintenance option for homeowners.

When it comes to choosing the best option for your decking needs, you can trust Westwood Millworks to provide you with the highest quality thermally modified wood decking on the market. Our commitment to sustainability and durability means that you can enjoy your deck for years to come without having to worry about frequent repairs or replacements.

What Is Thermally Modified Wood?

If you're in the market for a new deck, you may have heard of thermally modified wood. This type of wood is becoming increasingly popular because of its durability, stability, and resistance to rot and decay. In this section, we'll take a closer look at what thermally modified wood is and why it might be the best option for your deck.

The Science Behind Thermal Modification

Thermally modified wood is created through a process called pyrolysis. During pyrolysis, the wood is heated to high temperatures (usually between 180 and 220°C) in the absence of oxygen. This causes chemical changes to occur within the wood, altering its cell structure and making it more resistant to decay and insects.

The process of thermal modification also removes moisture from the wood, making it less prone to warping, splitting, and shrinking. The result is a more stable and durable wood product that is ideal for outdoor use.

Comparison with Traditional Wood Products

Thermally modified wood has several advantages over traditional wood products. For one, it is more resistant to decay and insects, which means it requires less maintenance over time. It is also more stable and less likely to warp or shrink, which can help prevent problems like uneven decking or gaps between boards.

At Westwood Millworks, we specialize in thermally treated wood products, including decking, siding, and lumber. Our high-quality products are made from a variety of wood species, including ash, oak, and pine. We use only the highest quality chemicals and processes to ensure that our products are safe and durable.

If you're looking for a reliable and long-lasting deck, consider thermally modified wood from Westwood Millworks. Our products are backed by years of experience and expertise, and we're confident that you'll be satisfied with the results.

Benefits of Thermally Modified Wood for Decking

If you are looking for a durable and stable decking material that is resistant to decay, rot, and insects, thermally modified wood (TMW) is an excellent choice. TMW is a type of wood that has undergone a heat treatment process to improve its properties, making it more resistant to decay and pests. In this section, we will discuss the benefits of using TMW for your decking needs.

Enhanced Durability and Stability

One of the main benefits of using TMW for decking is its enhanced durability and stability. The heat treatment process changes the cell structure of the wood, reducing its equilibrium moisture content and making it more resistant to decay and insects. This means that TMW is less likely to warp, crack, or split over time, making it a more stable and long-lasting decking material.

Resistance to Decay and Pests

TMW is also highly resistant to decay and pests, making it an ideal choice for outdoor decking. The heat treatment process removes the sugars and other nutrients that insects and fungi need to survive, making TMW less attractive to pests and less prone to rot. This means that TMW decking requires less maintenance and is less likely to need repairs over time.

Aesthetic Advantages

In addition to its enhanced durability and resistance to decay and pests, TMW also offers a range of aesthetic advantages. The heat treatment process gives TMW a rich, natural color that is highly sought after for decking and other outdoor applications. TMW also has excellent dimensional stability, meaning that it is less likely to shrink, swell, or warp over time due to changes in temperature and humidity.

At Westwood Millworks, we are committed to providing the highest quality thermally-treated wood products on the market. Our TMW decking is made from sustainably sourced wood and undergoes a rigorous heat treatment process to ensure maximum durability and stability. With its natural beauty, resistance to water, and superior aesthetic and performance characteristics, TMW decking from Westwood Millworks is the perfect choice for your outdoor decking needs.

Installation and Maintenance

Installing Thermally Modified Wood Decking

When it comes to installing thermally modified wood decking, it is important to follow the manufacturer's instructions carefully. At Westwood Millworks, we provide detailed installation guidelines to ensure that your deck is properly installed and will last for years to come.

First, you'll need to make sure that the joists are properly spaced. For our 5/4" deck boards, we recommend a maximum joist spacing of 16 inches on center. This will help to ensure that your deck is sturdy and safe.

Next, you'll need to install the deck boards. We recommend using stainless steel screws or hidden fasteners to attach the boards to the joists. This will help to prevent rust and corrosion, which can weaken the deck over time.

Finally, it is important to properly maintain your deck once it is installed. Caring for your deck will help to ensure that it lasts for years to come.

Caring for Your Deck

At Westwood Millworks, we believe that proper maintenance is key to the longevity of your deck. Here are some tips for caring for your thermally modified wood deck:

  • Sweep your deck regularly to remove dirt and debris. This will help to prevent scratches and other damage to the surface of the deck.
  • Wash your deck down with a hose or pressure washer to remove dirt and grime. Be sure to use a mild detergent and follow the manufacturer's instructions carefully.
  • Inspect your deck regularly for signs of damage or wear. If you notice any issues, such as loose boards or rusted screws, be sure to address them promptly.
  • Apply a protective finish to your deck to help prevent fading and weathering. At Westwood Millworks, we recommend using a pigment-free oil for a natural look.

By following these tips, you can help to ensure that your thermally modified wood deck stays looking great for years to come. And with Westwood Millworks as your supplier, you can be confident that you're getting the best quality thermally-treated wood products on the market.

Design Considerations and Applications

When it comes to designing your thermally modified wood deck, there are a few important considerations to keep in mind. Choosing the right species and profiles will play a key role in the overall look and feel of your project. Additionally, creative uses in outdoor spaces can enhance the functionality and aesthetic appeal of your deck.

Choosing the Right Species and Profiles

Selecting the right species of wood for your project is essential. Different species have unique characteristics that can affect the durability, color, and texture of the final product. At Westwood Millworks, we offer a variety of species to choose from, including ash, oak, and poplar. Each species has its own unique benefits, so it's important to choose the one that is best suited for your project.

In addition to species, the profile of your wood can also impact the overall look and feel of your deck. At Westwood Millworks, we offer a variety of profiles to choose from, including tongue and groove, shiplap, and beveled. Each profile has its own unique advantages, so it's important to choose the one that is best suited for your project.

Creative Uses in Outdoor Spaces

Thermally modified wood can be used in a variety of creative ways in outdoor spaces. In addition to decking, thermally modified wood can be used for porch floors, cladding, and even furniture. At Westwood Millworks, we offer a variety of thermally treated wood products that can be used for a wide range of projects.

One creative use of thermally modified wood is for accent walls. A thermally modified wood accent wall can add warmth and texture to an outdoor space, creating a cozy and inviting atmosphere. Another creative use of thermally modified wood is for outdoor furniture. A thermally modified wood bench or chair can add a touch of natural beauty to any outdoor space.

In conclusion, when it comes to designing your thermally modified wood deck, it's important to choose the right species and profiles to achieve the desired look and feel. At Westwood Millworks, we offer a variety of thermally treated wood products that can be used for a wide range of projects, including decking, porch floors, cladding, and furniture. Our products are of the highest quality and are guaranteed to provide long-lasting beauty and durability to your outdoor space.

Environmental Impact and Sustainability

Thermally modified wood is an eco-friendly and sustainable alternative to traditional wood products. The thermal modification process uses heat and steam instead of chemicals, making it a non-toxic and environmentally friendly option for decking.

Eco-Friendly Attributes

Thermally modified wood is an excellent choice for those who are concerned about the environment. It is produced from sustainable and renewable resources, making it an eco-friendly option. The production process of thermally modified wood has minimal impact on the environment and is considered to be a green process due to the absence of any additional chemicals.

The Lifecycle of Thermally Modified Wood

The lifecycle of thermally modified wood is sustainable and environmentally friendly. The production process of thermally modified wood reduces its environmental footprint compared to other decking materials. The material has a lower environmental impact than natural wood decking because it is made from sustainable, renewable resources.

At Westwood Millworks, we are committed to providing our customers with the best thermally-treated wood products on the market. Our thermally modified wood decking is a real wood product that offers superior durability, strength, and sustainability. We use only the highest quality materials and production methods to ensure that our products are of the highest quality.

Choose Westwood Millworks for your thermally modified wood decking needs and enjoy a sustainable, eco-friendly, and long-lasting solution for your outdoor living space.

Reading next

Thermally Modified vs Pressure Treated Wood: A Comparison by Westwood Millworks
Thermally Modified vs Pressure Treated Wood: A Comparison by Westwood Millworks

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.